What Information Should Dentists Send for an Implant Lab Case?

Nov 09, 2026

Leave a message

An implant restoration is only as accurate as the information the lab receives. When a dentist sends incomplete case data to a dental laboratory, the result can be delays, remakes, and restorations that fit poorly or look wrong. The lab cannot accurately interpret information it has never received.

 

A complete implant lab case should give the dental laboratory enough information to identify the implant system, understand the intended restoration, reproduce the implant position and occlusion, and follow the dentist's esthetic and functional requirements.

 

This guide walks through the information dentists should include when submitting an implant case to a dental lab - from implant system and scan body details to shade, occlusion, clinical records, and digital files - so the restoration can move through the laboratory workflow with fewer unnecessary questions or delays.

 

Screw-Retained Zirconia Implant Crown

 

Send the Exact Implant System and Component Details

One of the most critical pieces of information in an implant case submission is the exact implant system - including the manufacturer, system, platform, and relevant connection information for the dental implant placed in the patient's jaw.

 

The implant system determines the component chain used during the laboratory workflow, including abutment geometry, screw type, scan body compatibility, and the CAD/CAM library used to design the restoration. Different implant systems and component families should not be assumed to be interchangeable, and a dental lab cannot reliably fabricate a correctly fitting abutment or implant crown without identifying the correct platform.

 

Dentists should specify the following at minimum:

  • Manufacturer and implant system name
  • Platform diameter, for example 3.5 mm, 4.3 mm, or 5.0 mm
  • Connection type - internal hex, external hex, conical connection, or internal octagon
  • Implant body length and diameter, if relevant to abutment selection

 

The connection type matters more than many dentists realize. Two connections from the same manufacturer may appear similar on a radiograph while requiring different abutments, screws, or digital libraries.

 

Sending only the implant system name without the platform or connection information can leave the laboratory unable to confirm the required components.

 

When the implant lab knows the exact system and platform, the technician or CAD designer can select the appropriate library and proceed with the restoration design with greater confidence. When this information is incomplete, the case may need to be placed on hold while the missing details are confirmed.

 

Specify the Restoration Type and Retention Method

The dental lab also needs to know exactly what it is being asked to fabricate.

 

A single-unit screw-retained implant crown, a cement-retained crown on a custom abutment, a multi-unit implant bridge, and a full-arch fixed restoration follow different laboratory workflows and may require different materials, components, and design parameters. Dentists who want a broader comparison of these options can also review this guide to implant crowns and restoration options.

 

The implant lab prescription should clearly state the restoration type and the intended retention method.

 

Restoration Type

Retention Method

Typical Abutment

Lab Workflow Notes

Single-unit crown

Screw-retained

Ti-base + zirconia/ceramic

Access hole design, screw channel angulation

Single-unit crown

Cement-retained

Custom abutment, zirconia or titanium

Margin placement, cement space

Multi-unit bridge

Screw-retained

Multi-unit abutments

Framework span, passivity verification

Full-arch fixed restoration

Screw-retained

Multi-unit abutments or custom milled bar

PMMA try-in, metal/zirconia framework

Overdenture

Attachment-retained

Locator-type or ball abutments

Housing pickup, denture base design

 

Beyond the restoration type, dentists should communicate the intended design.

 

Is the restoration provisional or final? Should the dental lab reproduce the contour and emergence profile of an existing provisional? Is there a specific emergence profile developed during healing that must be preserved?

 

A well-contoured provisional can serve as an important design reference - but only when the laboratory receives the provisional itself or a digital scan that captures its contour.

 

The choice between a standard component and a patient-specific solution may also affect the workflow. For cases where abutment selection is important, understanding the differences between custom and stock implant abutments can help clarify the prescription before the case reaches the lab.

 

The retention method can also affect the clinical result. Screw-retained restorations are retrievable and eliminate residual cement, making them the preferred option for many posterior implant cases. A screw-retained zirconia implant crown, for example, requires the laboratory to evaluate screw access position, restoration contour, and available restorative space.

 

Cement-retained restorations may offer esthetic advantages in anterior situations where the screw access channel would otherwise exit facially, but they carry a documented risk associated with subgingival residual cement.

 

The dentist should therefore specify the intended retention method rather than leaving this decision unclear in the prescription.

 

Send Accurate Impression or Digital Scan Data

The dental laboratory needs an accurate record of the implant position, surrounding soft tissue contour, adjacent dentition, and occlusal relationship.

 

This information may be captured through a conventional impression using an impression coping or through a digital implant workflow using an intraoral scan and scan body.

 

Conventional Impression Requirements

For a conventional implant impression, the dentist should send:

  • The impression itself, with the impression coping seated and captured in the impression material
  • The corresponding implant analog if the laboratory does not stock the required system
  • A soft tissue model or information indicating the soft tissue depth, since the emergence profile depends on the transmucosal height

 

The impression coping must correspond to the correct implant system and platform.

 

A closed-tray impression captures the coping in relation to the impression, while an open-tray technique uses a coping screw that passes through the tray. Both techniques can be used, but the laboratory needs to understand which method was used and have access to the corresponding implant components.

 

Digital Scan Requirements

Digital implant workflows and intraoral scanning have become increasingly important in restorative dentistry.

 

An intraoral implant scan records the implant position using a scan body - a geometrically coded component attached to the implant or abutment that allows CAD software to register the implant's position, angulation, and depth.

 

For a digital implant lab case, the dentist should normally provide:

  • The STL file of the working arch with the scan body in place
  • The opposing arch STL file
  • The digital bite registration scan, or a physical bite record if required
  • Scan body identification, including manufacturer and model, so the dental lab can select the correct digital library

 

Dentists using digital case submission may also find it useful to review what dental labs need from an intraoral scan before sending the case.

 

Scan body identification is particularly important in digital implant cases.

 

Each scan body has a defined geometry corresponding to a particular position file or CAD library. If the scan body is matched to the wrong library, the digital restoration may be designed from an incorrect implant position and may not seat properly.

 

Whether the case is digital or conventional, the impression data should accurately communicate three essential elements:

  • Implant position
  • Soft tissue emergence
  • Occlusal relationship

 

If one of these elements is missing, the laboratory may need additional information before the case can proceed.

 

All-on-X Implant Bridge

 

Include the Opposing Arch and Bite Registration

A dental lab cannot design a functional implant restoration without knowing how the teeth come together.

 

The opposing arch - the teeth or restorations in the jaw opposite the implant site - should be provided as either a physical model or a digital scan.

 

Without an opposing arch, the dental technician has no reliable reference for occlusal stops, cusp-to-fossa relationships, or potential interference with the patient's existing bite.

 

A bite registration records the patient's occlusal relationship, including the vertical dimension of occlusion and the centric relation or maximal intercuspation position.

 

This can be sent as:

  • A physical bite registration using wax, silicone, or bite rim material
  • A digital bite scan captured with an intraoral scanner
  • A verified mounted model on an articulator

 

For full-arch implant cases or cases involving a change in vertical dimension, a facebow record and articulator mounting may also be necessary.

 

The dental lab may need to know the mounting type - such as semi-adjustable or fully adjustable - as well as the articulator model if the case will be remounted.

 

Bite registration is an important part of the implant case submission. A restoration designed without a reliable occlusal reference can require extensive chairside adjustment and may create unwanted occlusal problems.

 

Provide Shade, Photos, and Esthetic Information

Shade matching for implant restorations can be more challenging than for natural tooth preparations because the implant abutment - particularly titanium or other metallic components - may influence the appearance of translucent restorative materials.

 

The implant lab therefore needs more than a single shade value when esthetic demands are high.

 

Dentists should provide:

  • Tooth shade using a recognized dental shade system
  • Stump shade - the color of the prepared abutment or underlying implant component when relevant
  • Gingival shade when the restoration includes pink ceramic or when soft tissue is visible in a high smile line
  • Characterization notes covering surface texture, translucency, incisal halo, mamelons, or specific staining requirements

 

A single shade value is rarely sufficient for demanding anterior implant cases.

 

A shade map showing cervical, body, and incisal shades separately can give the dental technician much more information. Clinical photographs showing adjacent teeth under appropriate lighting can also help the laboratory reproduce the surrounding dentition.

 

For anterior and other high-esthetic implant restorations, useful photographs may include:

  • Full-face smile
  • Retracted frontal view
  • Lateral views
  • Close-up of the implant site
  • Adjacent teeth with the shade tab visible
  • Photos showing surface texture and translucency

 

For cases where zirconia is selected, the laboratory may also need to balance shade, translucency, implant position, and underlying component color when designing a zirconia implant crown.

 

For high-esthetic-zone cases, additional shade communication can significantly improve the amount of visual information available to the dental technician.

 

Share the Clinical Information the Lab Needs

The laboratory does not clinically examine the patient. It cannot directly evaluate the patient's occlusion or observe how the peri-implant tissue has healed.

 

The dentist is therefore the dental lab's primary source of patient-specific clinical information.

 

Important information to include in the implant lab prescription includes:

  • Tooth position being restored, using Universal or FDI numbering
  • Inter-arch space - the vertical clearance between the implant platform and opposing dentition
  • Adjacent tooth contacts, including whether the neighboring teeth are stable or whether mesial or distal drift is present
  • Soft tissue health and biotype
  • Occlusal scheme, such as canine guidance, group function, or mutually protected occlusion
  • Whether the implant restoration should be in or out of occlusion at delivery
  • Parafunctional habits such as bruxism or clenching

 

Inter-arch space can affect whether there is adequate room for the intended restoration design and component combination.

 

Contact information is also useful. If adjacent teeth have moved since implant placement, the dental lab may need guidance regarding the desired proximal contact strength.

 

Soft tissue condition is particularly relevant to anterior implant restorations because the emergence profile, gingival contour, margin location, and restorative material can influence the final appearance. Clinical assessment of peri-implant diseases and conditions remains the dentist's responsibility and can provide important context when planning the definitive restoration.

 

Parafunctional habits should also be communicated because bruxism or clenching may affect material selection, occlusal design, and whether a night guard should be considered alongside the implant restoration.

 

When to Include a Provisional Restoration

If a provisional restoration was worn during the healing phase, it can be useful to send the provisional to the dental lab or provide a digital scan of it.

 

The provisional records the emergence profile - the contour around which the soft tissue has developed - as well as the occlusal scheme the patient has already adapted to.

 

Replicating a clinically validated provisional contour in the final implant restoration can be one of the most predictable ways to reproduce the established soft tissue architecture.

 

The lab can copy what the dentist has already evaluated clinically. Sending the provisional, or a scan of it, can turn a design based on assumptions into a more controlled replication workflow.

 

Tell the Lab Your Timeline and Delivery Needs

Every implant lab case has a clinical deadline, and the dental laboratory should know that deadline before production begins.

 

A rushed case may require changes to scheduling, expedited shipping, or modifications to the normal workflow. These arrangements are much more difficult if the laboratory only learns about the delivery date near the end of production.

 

Dentists should communicate:

  • Try-in date - when the patient is scheduled for the restoration try-in or delivery appointment
  • Whether a try-in stage is required
  • Whether a PMMA or wax try-in is needed before final fabrication, particularly for full-arch or high-esthetic cases
  • Shipping or pickup preference
  • Remake and adjustment expectations when relevant

 

A realistic turnaround for a single-unit implant crown is typically 5 to 10 working days from the day the lab receives complete case data.

 

Full-arch cases with a try-in stage may take 3 to 4 weeks.

 

These are ranges rather than guarantees. Complex implant cases involving custom shading, multiple try-ins, or full-contour zirconia frameworks can require additional time.

 

Sending an implant case with a clear deadline and complete information allows the dental laboratory to schedule the production process more effectively. Sending a deadline without the required clinical and technical information simply transfers the delay to another stage of the workflow.

 

Zirconia Crown Over Dental Implants

 

Implant Lab Case Submission Checklist

The following checklist consolidates the baseline information a dentist should send for a standard implant lab case.

 

Complex cases - including full-arch restorations, multi-unit implant bridges, or high-esthetic anterior cases - may require additional information. For example, an All-on-X implant bridge typically requires more extensive implant, occlusal, esthetic, and try-in records than a routine single-unit crown.

 

Information Category

What to Send

Common Format

Implant system

Manufacturer, system, platform, connection type

Written on prescription

Restoration type

Crown, bridge, full-arch, overdenture; screw- or cement-retained

Written on prescription

Impression data

Digital STL scan with scan body or conventional impression with coping

Digital file or physical model

Scan body information

Manufacturer and model/library identification

Written notes

Opposing arch

Digital scan or physical model

Digital file or physical model

Bite registration

Digital bite scan or physical bite record

Digital file or physical record

Shade

Tooth shade, stump shade, gingival shade if applicable

Shade guide value + notes/photos

Clinical context

Tooth position, inter-arch space, biotype, occlusal scheme, habits

Written notes

Provisional

Physical provisional or scan of provisional

Physical item or digital file

Timeline

Try-in date, delivery date, shipping preference

Written on prescription

 

This checklist covers the baseline dental lab implant requirements for many routine cases.

 

A case that arrives with complete implant information, accurate digital or conventional records, a clear restoration prescription, and the required esthetic and occlusal references can move into production much more efficiently.

 

A case with essential information missing may need to remain on hold until the dental practice and laboratory confirm the outstanding details.

 

Conclusion

A successful implant lab case starts with complete, specific, and unambiguous information. Dentists should provide the exact implant system and platform, restoration type and retention method, accurate impression or digital scan data, scan body identification, opposing arch and bite records, shade and esthetic references, relevant clinical context, and a clear production timeline. The more complete the implant case submission is, the less the laboratory needs to rely on assumptions or interrupt production to request clarification.

 

ADS Dental Laboratory Ltd is a full-service digital dental laboratory in Shenzhen, China, with a dedicated implant team and digital workflow supporting customized implant restorations from single-unit crowns and custom abutments to implant bridges and complex full-arch cases. If you would like to discuss an implant case, digital workflow, or long-term dental lab outsourcing project, contact our team to review your case requirements.

 

FAQ

What files should a dentist send for a digital implant lab case?
For a typical digital implant case, the dentist should send the working arch scan with the scan body in place, the opposing arch scan, and the bite registration. The lab should also receive the scan body manufacturer and model or other information needed to identify the correct CAD library.
Depending on the restoration, additional files such as a soft tissue scan, provisional scan, pre-operative scan, or existing prosthesis scan may also be useful.
 

Does the dental lab need to know the scan body manufacturer and model?
Yes. Scan body identification is important because the laboratory must match the scanned geometry to the correct digital implant library.
Providing the implant system alone may not be sufficient when different scan bodies or third-party components can be used with the same implant platform.
 

What extra information should I send for an anterior implant crown?
For an anterior implant crown, provide detailed shade information, clinical photographs, soft tissue and emergence profile records, and information about the adjacent teeth.
If a provisional restoration has already established an acceptable emergence profile, sending the provisional or a digital scan of it can help the lab reproduce that contour in the definitive restoration.
 

What additional records are needed for a full-arch implant case?
Full-arch implant restorations often require more information than a single implant crown. Depending on the case, the laboratory may need implant or multi-unit abutment information, accurate jaw relationship records, vertical dimension, midline, smile line, tooth setup references, provisional or existing denture scans, photographs, and instructions regarding the try-in workflow.
The exact requirements should be confirmed with the dental laboratory before production begins.
 

Can an implant lab case start if some information is missing?
The laboratory may be able to review the case, but production should not rely on assumptions about critical information such as implant platform, scan body identification, restoration type, retention method, or occlusion.
Confirming missing information before design begins is generally more efficient than correcting an inaccurate restoration later.

 

Send Inquiry